Small Group Tutorials

Here to help students catch up, keep up, and move ahead. Book a consultation here.

How to Perform in the new G3 SEC Examinations | Learner’s Guide Vol 1550 | Mathematics Orchard Packing-Rack Position Model — Linear Equations, Feasible Intervals and Measured Bounds

A line on a graph may tell you whether a planned position satisfies a condition. It cannot tell you whether a real packing rack has been designed or installed safely. This G3 Mathematics guide makes that distinction clear while showing how to turn a fictional orchard packing-rack model into linear equations, simultaneous conditions, graphs, intervals, bounds and a final reasoned conclusion. The key is to make each symbol mean something before asking the algebra to do more.

The 2027 Singapore-Cambridge SEC G3 Mathematics syllabus is K310, formerly 4052. Its two compulsory papers each last 2 hours 15 minutes, carry 90 marks and contribute 50% to the overall result. Paper 2 concludes with a real-world application question. The example here is original examination-style practice, not an official paper or a real engineering load calculation. Its reaction-force formulas are supplied mathematical relationships derived from an idealised classroom system.

  • Define the position variable and preserve units while rearranging linear functions.
  • Interpret two changing quantities whose sum remains constant.
  • Find intersection points, boundaries and feasible intervals from inequalities.
  • Use measurement precision to construct reliable upper and lower bounds.
  • Complete thirty-six original worked questions, from short algebra to an extended decision proof.

Vol 1549: Physics moments, equilibrium and model limits · Vol 1546: constraints in a different mathematical context · Vol 1494: weighing-ledger equations · Secondary Mathematics algebra · Functions and graphs · Sengkang PSLE-to-secondary route.

1. A familiar story can contain an unfamiliar mathematical question

Imagine a school display about orchard packing. A drawing shows a model beam with a left support A at position zero and a right support B at 1.20 metres. The beam and its box carry a fixed total weight of 210 newtons in the simplified example. When the box is placed at position x metres, the model predicts how the two upward reactions change. The question for Mathematics is how to use the relationships, not how to build a physical shelf.

The previous Physics volume explains why a moment about a selected pivot produces the relationships used here. This volume treats those relationships as a set of linear mathematical functions. You should be able to solve the following questions even if the diagram changes to a classroom lever, an abstract pair of counters or another context in which one quantity rises as another falls. Transfer comes from understanding the algebra, not remembering the orchard story.

2. Define x before calculating

Let x be the horizontal position, in metres, of the box’s vertical line of action, measured from support A. Position x = 0 means that line passes through A. Position x = 1.20 means it passes through B. The variable is a position on a number line. It is not the box’s weight, the size of the beam or a reaction force. State the definition in the first line of your working.

A question may give a position in centimetres. Convert before substituting into a formula derived using metres. For example, 80 cm equals 0.80 m. If a student uses x = 80 in a formula expecting metres, the algebra will produce a number that is arithmetically consistent with the substitution but meaningless for the given model. Units are part of the mathematical definition, not an optional label.

3. Establish the two functions

For the idealised system, the model gives the right support reaction as R_B(x) = 30 + 125x newtons and the left support reaction as R_A(x) = 180 − 125x newtons, where x is in metres. The constants have meaning: when x = 0, the formula returns 30 N at B and 180 N at A. Increasing x by one metre increases the predicted reaction at B by 125 N and decreases the reaction at A by 125 N.

You can verify the formulas from the Physics relationships. The beam’s own weight contributes 36 N m of moment about A. A 150 N box at x metres contributes 150x N m. With a 1.20 m support spacing, the moment equation is 1.20R_B = 36 + 150x, giving R_B = 30 + 125x. The sum of support reactions is 210 N, so R_A = 210 − R_B = 180 − 125x. In Mathematics, those steps are a translation from supplied relationships to functions.

4. A constant total is an important invariant

Add the formulas: R_A + R_B = (180 − 125x) + (30 + 125x) = 210. The x terms cancel. This identity holds for every algebraic x inserted into the two formulas. It says the model predicts a redistribution of the fixed total, not a creation of extra weight. If one calculated result increases by 20 N, the other must decrease by 20 N.

Use this invariant as a fast check. At x = 0.80, R_A = 180 − 100 = 80 N and R_B = 30 + 100 = 130 N. Their sum is 210 N. If you instead obtain 80 N and 140 N, do not quietly accept both numbers because they are positive. The pair violates a defining relationship of the model. Find the arithmetic or substitution error.

5. Tables reveal the direction of change

Make a small table with x values 0.00, 0.40, 0.60, 0.80, 1.00 and 1.20 metres. Calculate R_A as 180, 130, 105, 80, 55 and 30 N. The corresponding R_B values are 30, 80, 105, 130, 155 and 180 N. The total remains 210 N in each row. The pattern is easy to see because equal increases in position produce equal changes in each reaction.

A table is not merely a way to present answers. It is a test of whether the proposed relationship is linear. Here, increasing x by 0.20 m changes a reaction by 25 N in magnitude, regardless of which valid table interval you inspect. That constant rate of change is the gradient. In other problems, a nonconstant rate should stop you from assuming that a straight line is the right model.

6. What the gradients mean

The gradient of R_A against x is −125 N per metre. The negative sign means the predicted left reaction decreases when x increases. The gradient of R_B is +125 N per metre. A larger gradient magnitude would mean greater sensitivity of the output to position. The unit N/m tells the reader how the output changes per metre of input. It is not the unit of reaction force itself.

Students should distinguish a negative gradient from a negative output. At x = 0.80, R_A is positive 80 N even though the line slopes downward. Its gradient is negative everywhere in the linear model. Only beyond a particular x does R_A itself become negative. Confusing these two uses of the minus sign can lead to an entirely wrong interpretation of a graph.

7. Two straight lines meet at an equality point

Set the two expressions equal: 180 − 125x = 30 + 125x. Rearranging gives 150 = 250x, so x = 0.60 m. Substitution shows R_A = R_B = 105 N at this position. On a graph with x along the horizontal axis and reaction force on the vertical axis, the two straight lines cross at the point (0.60, 105).

The equality point is a mathematical landmark, not automatically the ‘best’ position. If the question asks for equal reactions, x = 0.60 is the required answer. If the question asks for the maximum allowed x under a different constraint, equality may be irrelevant. Before calling an intersection desirable, specify the objective that would make equal outputs useful.

8. Work backwards from a reported reaction

Suppose the fictional model reports R_A = 55 N. Solve 180 − 125x = 55. Subtract 180: −125x = −125, giving x = 1.00 m. Check by substitution into the other expression: R_B = 30 + 125 = 155 N. The reaction pair sums to 210 N as expected. This is an inverse problem: the output is given, and the input position is unknown.

Inverse reasoning is common in real-world application questions. The question might ask you to find the ticket price from a sales total, time from a distance formula or concentration from a mixing relationship. The method is the same: identify which quantity is unknown, form the equation, solve and check whether the result lies in the appropriate domain. A correct inverse algebra result can still be excluded by a separate contextual condition.

9. Algebra has a domain; context narrows it

The expressions 180 − 125x and 30 + 125x can be evaluated for any real x. But the classroom contact model has restrictions. In the previous Physics guide, each unanchored point support was assumed able to push upward, not pull downward. Under that stated idealisation, the two predicted reactions must be nonnegative. We therefore require R_A ≥ 0 and R_B ≥ 0.

Solving R_A ≥ 0 gives x ≤ 180/125 = 1.44. Solving R_B ≥ 0 gives x ≥ −30/125 = −0.24. If an additional story condition specifies that the box centre lies at or to the right of A, then x ≥ 0. The practical teaching domain for that stated setting becomes 0 ≤ x ≤ 1.44. This is a valid domain for the mathematical contact model, not a certification of physical stability or safe loading.

10. A zero reaction is a boundary, not an approval

At x = 1.44 m, R_A = 0 and R_B = 210 N. Beyond 1.44, the formula gives a negative value for R_A. The previous guide explained that the assumed unanchored support cannot supply a downward pulling reaction, so the existing contact picture has reached its limit. Mathematics can locate this boundary exactly. It cannot infer material strength, joint capacity or real rack performance from that one calculation.

Some learners write ‘the rack is safe until 1.44 m’ because the interval ends there. That statement introduces a conclusion never established by the algebra. A better answer is: ‘Under the specified two-support model, both calculated contact reactions remain nonnegative for the stated interval.’ The final wording is longer but materially more precise. It names exactly what the inequality checks.

11. Add a position restriction from the problem

Imagine that the fictional class display requires the box’s marker to lie between x = 0.30 m and x = 1.30 m to be visible on its drawing. Write 0.30 ≤ x ≤ 1.30. This is a display-layout requirement, not a property derived from forces. Because the basic contact condition is 0 ≤ x ≤ 1.44, combining the two leaves the interval 0.30 ≤ x ≤ 1.30.

This is called the intersection of intervals. Both restrictions must hold simultaneously. Drawing them on separate number lines and shading their overlap is often easier than trying to remember which inequality to keep. If the two shaded sections do not overlap, there is no feasible value. Do not manufacture one by averaging incompatible endpoints.

12. Add a minimum reaction as a mathematical condition

The made-up worksheet might specify R_A ≥ 30 N to give students another algebraic condition. Substitute the formula: 180 − 125x ≥ 30. Subtract 180 to obtain −125x ≥ −150. When you divide by −125, reverse the inequality: x ≤ 1.20 m. The direction change is essential. If you forget it, the interpretation will contradict the decreasing graph of R_A.

The 30 N threshold is an invented classroom number, not an approved minimum reaction for real equipment. It provides practice with inequalities whose coefficients are negative. Check the boundary: at x = 1.20, R_A = 30 N; for x = 1.30, R_A = 17.5 N, which is smaller and therefore fails the fictional requirement. Such substitution checks expose a reversed sign.

13. Add a maximum value for the other reaction

Now suppose the worksheet also asks for R_B ≤ 170 N. Using R_B = 30 + 125x, we get 30 + 125x ≤ 170, so 125x ≤ 140 and x ≤ 1.12 m. This upper bound is stricter than x ≤ 1.20 and x ≤ 1.30. The full permitted interval is therefore 0.30 ≤ x ≤ 1.12 when all of the invented constraints are included.

Students sometimes solve each condition correctly and then present every interval without identifying their common portion. The task is not finished until the intersection is stated. You can collect conditions in a short table: drawing location, left reaction, right reaction and contact assumption. Indicate which condition sets the final lower endpoint and which sets the final upper endpoint.

14. Prove feasibility by checking a candidate

Choose x = 1.00 m. Then R_A = 55 N and R_B = 155 N. Both are nonnegative. The position lies between 0.30 and 1.30 m. The left reaction is at least 30 N and the right reaction is no more than 170 N. Therefore x = 1.00 satisfies every invented condition. This is a constructive mathematical feasibility proof: present a candidate and show that all restrictions hold.

A candidate can be feasible without being the only solution. In this case, every x from 0.30 through 1.12 inclusive is allowed by the stated inequalities. If a question asks for ‘a possible position’, one verified value suffices. If it asks for ‘the range of positions’, a single value is not enough. Always reread the command word before deciding what form the answer must take.

15. Investigate an endpoint carefully

At x = 1.12 m, the formulas give R_A = 180 − 140 = 40 N and R_B = 30 + 140 = 170 N. The maximum invented reaction condition is satisfied exactly. If the word ‘no more than’ appears, equality is included; a closed endpoint or ≤ sign is appropriate. If the problem instead said ‘less than 170 N’, x = 1.12 would be excluded.

This small wording difference changes the mathematical solution. In interval notation, a square bracket normally means that an endpoint is included, while a round bracket indicates exclusion. Students can instead write exact inequalities to avoid unfamiliar notation. Either way, the final statement must preserve the difference between strict and non-strict conditions.

16. Interpret the feasible region on a graph

Draw R_A and R_B as straight lines with x in metres on the horizontal axis and force in newtons on the vertical axis. Add horizontal reference lines at 30 N for R_A and 170 N for R_B. Add vertical markers at x = 0.30 and 1.30 for the position requirement. The feasible part is where all requested conditions hold at once, producing the interval from 0.30 to 1.12.

A graph is a way of checking algebra, not replacing exact working when a precise endpoint is asked for. The line crossing x = 1.12 may look like x = 1.1 on a roughly sketched axis. Use the equation to establish 1.12 exactly, then use the graph to explain why values to the right break the upper reaction condition. Label axes and the feasible region clearly.

17. Optimisation needs an objective

Suppose a separate examination question asks for the smallest difference between the two predicted reaction forces within the permitted interval. The difference is |R_A − R_B| = |(180 − 125x) − (30 + 125x)| = |150 − 250x|. Its minimum is zero at x = 0.60 m. That x belongs to the feasible interval, so it is a valid mathematical optimum for this named objective.

If the objective were to maximise x instead, the optimum would be 1.12 m under the current invented conditions. If the objective were to maximise R_A, the optimum would occur at x = 0.30 m because R_A decreases as x increases. The word ‘best’ has no algebraic meaning until the objective is defined. Three legitimate objectives can select three different points from the same feasible interval.

18. Translate a sensitivity statement

The coefficient 125 N/m allows a quick change calculation. Moving the box’s model position by 0.16 m to the right raises R_B by 125 × 0.16 = 20 N and lowers R_A by 20 N. This difference calculation is often simpler than evaluating both functions at the old and new x. The sum of reactions remains 210 N, providing a second check.

If the question asks for a leftward movement, Δx is negative, so the changes reverse direction. Write ΔR_B = 125Δx and ΔR_A = −125Δx. Use consistent units: Δx in metres and each output change in newtons. A student who describes the slope as ‘125 newtons’ omits the per-metre meaning that makes this reasoning work.

19. Recover a linear rule from two points

Suppose the formulas are hidden, but a table shows R_A = 130 N at x = 0.40 m and R_A = 55 N at x = 1.00 m. The gradient is (55 − 130)/(1.00 − 0.40) = −75/0.60 = −125 N/m. Insert one point into R_A = mx + c: 130 = −125(0.40) + c, giving c = 180. Thus R_A = 180 − 125x.

This method links graphical interpretation to algebra. Two distinct points determine a straight line if the linear-model assumption is justified. But two real-world readings do not, by themselves, prove that a physical process is exactly linear. In this teaching exercise, linearity comes from the supplied idealised model. In a data-based examination question, read the wording to see whether you are asked to draw a line of best fit or derive an exact rule.

20. Read position from a scale drawing

A diagram drawn to a stated scale can help check position. At a scale of 1:10, a real model length of 1.20 m corresponds to 12 cm on the drawing because 1.20 m is 120 cm and 120 ÷ 10 = 12. A position x = 0.80 m corresponds to 8 cm from A on that drawing, while x = 1.12 m corresponds to 11.2 cm.

Students should not confuse scale factor with a unit conversion. The scale reduces every length, whereas changing metres to centimetres multiplies the numerical measurement by one hundred. Write both operations if necessary. A graph’s horizontal axis need not be drawn to the same physical scale as a rack sketch; each representation requires its own units and labels.

21. A reported position may represent an interval

Imagine a reading stated as 1.10 m to the nearest 0.02 m. Under the ordinary nearest-value convention, the underlying position lies from 1.09 m inclusive to 1.11 m exclusive, assuming the half-way case rounds upward. In symbols, 1.09 ≤ x < 1.11. This is a numerical interval, not an experiment the learner is asked to perform. The rounding statement must be known before the bound can be determined.

Do not assume a reported value has infinite precision. When a question says ‘to the nearest 0.02 m’, half the rounding step is 0.01 m. When it says ‘to the nearest 0.1 m’, the half-step is 0.05 m. The two cases produce different intervals even if the printed value seems similar. State the convention used if endpoint treatment affects the answer.

22. Decreasing functions reverse output bounds

For R_A(x) = 180 − 125x and 1.09 ≤ x < 1.11, the largest predicted R_A occurs at the smallest x, namely 1.09. Its value is 180 − 125(1.09) = 43.75 N. At the excluded upper position 1.11, the formula would give 41.25 N. Therefore the full reaction range is 41.25 < R_A ≤ 43.75 N.

The reversed inequality directions are not a trick. They follow from the fact that the function decreases with x. If the input gets larger, the output gets smaller. A robust method evaluates the function at both endpoints, then decides which endpoint is included. Do not simply copy the input interval symbols onto the output interval without checking monotonicity.

23. Increasing functions preserve the ordering

For the same input interval, R_B = 30 + 125x increases with x. At x = 1.09 it is 166.25 N; at the excluded upper x = 1.11 it approaches 168.75 N. Hence 166.25 ≤ R_B < 168.75 N. The different endpoint inclusion from R_A is entirely consistent with both reactions summing to 210 N at the same actual position.

A common mistake is to combine the maximum of each output as if both happened together. The maximum R_A corresponds to the minimum x, while the maximum R_B corresponds to the maximum x. These maxima do not occur simultaneously. For coupled variables, keep track of the input that produced each bound. This becomes important in extended problems involving linked constraints.

24. Test a guaranteed condition under rounding

Suppose the invented requirement is R_B ≤ 170 N. If a reading is 1.10 m to the nearest 0.02 m, the greatest possible input is below 1.11 m and R_B stays below 168.75 N. The inequality is satisfied throughout the stated input interval. If a reading is 1.12 m to the nearest 0.02 m, the true position lies from 1.11 to below 1.13 m. Part of that interval gives R_B above 170 N.

The second rounded reading does not justify a guaranteed conclusion under the toy constraint. It does not automatically mean the true value fails either; the permitted and nonpermitted ranges overlap. This is a mathematical distinction between ‘always satisfies’, ‘may satisfy’ and ‘never satisfies’. Examiners can test it without needing an elaborate scientific story.

25. Unknowns can make a problem impossible to solve uniquely

If only the total reaction of 210 N were known, there would be infinitely many nonnegative pairs R_A and R_B whose sum equals 210. Another independent condition is needed to determine individual reactions. The position-dependent formula supplies that missing relationship. Likewise, knowing only that R_A equals R_B determines the position in this specific model because the two functions are already defined.

Whenever an answer appears unique, check where its uniqueness came from. A question might not provide enough information, or it may include a condition hidden in prose. Never invent the location of a box simply because you know the total weight. Identifying insufficient information demonstrates mathematical understanding and can prevent a false numerical conclusion.

26. Some collections of conditions have no solution

Consider two alternative invented requirements: R_A ≥ 100 N and R_B ≥ 125 N. The first gives 180 − 125x ≥ 100, hence x ≤ 0.64 m. The second gives 30 + 125x ≥ 125, hence x ≥ 0.76 m. Both cannot hold simultaneously. The intervals do not overlap, so the mathematical problem is infeasible under those restrictions.

A student who proposes x = 0.70 has not found a compromise that solves both requirements. At x = 0.70, R_A = 92.5 N and R_B = 117.5 N, each below the relevant threshold. A clear answer should identify the conflicting inequalities, show the impossible overlap and conclude that no such x exists. Do not force a solution because every examination question seems expected to have one.

27. Distinguish guaranteed feasibility from a single feasible value

Suppose x is reported as 1.10 m to the nearest 0.02 m and the permitted interval is 0.30 through 1.12 m. Every possible true x consistent with that reading falls inside the permitted interval, so the position condition is guaranteed in the stated model. If the reported x were 1.12 m under the same rounding rule, the possible range would extend above 1.12, so the rounded result would be insufficient to guarantee compliance.

This use of upper and lower bounds is a reasoning skill, not a claim that real supports have identical precision to the worksheet. To evaluate an actual device, one would require verified measurements, specifications and a much more complete physical model. In a G3 mathematics question, state the assumptions and test the entire measurement interval when asked for a guarantee.

28. A compact constraints table

Organise the core exercise as follows. ‘Model contact’: 0 ≤ x ≤ 1.44. ‘Drawing position’: 0.30 ≤ x ≤ 1.30. ‘Fictional left reaction requirement’: x ≤ 1.20. ‘Fictional right reaction requirement’: x ≤ 1.12. Their intersection is 0.30 ≤ x ≤ 1.12. A table keeps the language, algebraic rule and resulting bound beside one another, so a missing condition is easier to spot.

Do not copy the table mechanically in every response. A short question may need only two lines of working. A long application problem, especially one requiring a written decision, may benefit from a compact summary that verifies all the given restrictions. The purpose of the table is to reduce errors, not to replace explanation or inflate the length of the answer.

29. Build a mathematical argument, not a sales promise

At the end of the worksheet, the learner might be asked to recommend a display position for an imaginary illustration. You can say: ‘A marked position of 1.00 m satisfies every specified numerical constraint because the calculated reactions are 55 N and 155 N, and the position lies within the stated drawing range.’ That is a complete mathematical justification for the fictional display task.

Do not add, ‘Therefore the actual rack is safe for loading.’ The variables, loads, supports and thresholds in this guide were defined for examination practice. The algebra establishes a result within that model. The Physics owner explains additional assumptions about contact and forces. Neither the graph nor the inequalities provide actual engineering approval. The distinction is part of careful mathematical communication.

30. What to expect in the K310 papers

The official 2027 G3 Mathematics K310 syllabus specifies two compulsory papers, each lasting 2 hours 15 minutes with 90 marks and an equal 50% weighting. Paper 1 contains about twenty-six short-answer questions. Paper 2 comprises nine to ten questions of varying lengths and ends with a real-world application question. The examination tests the ability to use mathematical concepts in both familiar and unfamiliar contexts.

This guide focuses on the movement from basic linear equations to linked restrictions, bounds and evaluation. A paper may combine these ideas with geometry, statistics or another topic. Follow the question’s supplied context rather than assuming the orchard example predicts a future examination question. The official 2027 G3 Mathematics K310 syllabus is the authority for content and assessment details; the activities here are original practice.

31. Protect method marks with visible working

Write the function before substituting. Show the step in which you rearrange the inequality. If dividing by a negative coefficient, show the reversed direction. State the final intersection rather than presenting several incomplete ranges. When a graph is used, label units and give exact boundary values from algebra if required. These are ordinary habits that make work more checkable, not secret examination tactics.

Check a result through a different route where time allows. For example, solve the right reaction limit with algebra, then test a value slightly to either side of the resulting boundary. Or verify that the two reactions add to 210 N after substitution. Independent checks are more valuable than repeating the same calculation without examining its logic.

32. A revision routine for the first weak link

For a learner who struggles with this problem, identify the first actual obstacle. If x has no clear meaning, practise defining variables. If substitutions go wrong, convert units and check the function value. If inequalities are reversed, use short exercises with negative coefficients. If separate restrictions are solved but never combined, use number lines. If bound endpoints are wrong, practise increasing and decreasing functions.

Parents can help by asking the learner to explain what each line of the calculation means in an ordinary sentence. ‘This boundary is included because the condition says at most’ is a useful explanation. ‘This input range is not a real safety approval’ shows the student understands the limits of a model. Correct reasoning should become clearer when the story changes, not depend on memorising one set of numbers.

33. Thirty-six original worked practice questions

Practice 1. Convert 80 cm to metres before using x.

Answer: 0.80 m.

Reason: The function coefficients were derived using metres. Substituting 80 would be a unit mismatch, not a legitimate alternate method.

Practice 2. Find R_A when x = 0.

Answer: 180 N.

Reason: Use R_A = 180 − 125x. This is the line’s vertical intercept in the x-reaction graph.

Practice 3. Find R_B when x = 0.

Answer: 30 N.

Reason: The other line starts at 30 N in the algebraic model. The two outputs total 210 N.

Practice 4. Evaluate R_A at x = 0.40.

Answer: 130 N.

Reason: Compute 180 − 125(0.40) = 180 − 50. Keep the output in newtons.

Practice 5. Evaluate R_B at x = 0.40.

Answer: 80 N.

Reason: Compute 30 + 125(0.40) = 80. Checking 130 + 80 = 210 helps detect slips.

Practice 6. Find the reactions at x = 0.80.

Answer: R_A = 80 N, R_B = 130 N.

Reason: The functions are linked by a constant total. This pair illustrates redistribution as x increases.

Practice 7. Find the reaction pair at x = 1.00.

Answer: R_A = 55 N; R_B = 155 N.

Reason: The position lies inside the example feasible interval. Report both outputs with units.

Practice 8. Solve R_A = 105 N.

Answer: x = 0.60 m.

Reason: 180 − 125x = 105 gives 125x = 75. Substitution confirms the result.

Practice 9. Solve R_B = 105 N.

Answer: x = 0.60 m.

Reason: 30 + 125x = 105 gives x = 75/125. The equality point of the two lines is at this position.

Practice 10. Explain the −125 gradient.

Answer: For each 1 m increase in x, R_A decreases by 125 N within the model.

Reason: The gradient has units N/m. It does not say the force itself is negative.

Practice 11. Explain the +125 gradient.

Answer: For each 1 m increase in x, R_B increases by 125 N.

Reason: Increasing x shifts the predicted reaction from A toward B while maintaining a total of 210 N.

Practice 12. Compute the change in R_B for Δx = 0.16 m.

Answer: An increase of 20 N.

Reason: The change is 125 × 0.16. No complete recalculation is needed when only the difference is requested.

Practice 13. Compute the change in R_A for the same move.

Answer: A decrease of 20 N.

Reason: Its gradient is negative. The opposite changes keep the reaction sum constant.

Practice 14. Solve the inequality R_A ≥ 0.

Answer: x ≤ 1.44 m.

Reason: Subtract 180, divide by −125 and reverse the inequality. Add any other position conditions separately.

Practice 15. Solve R_B ≥ 0.

Answer: x ≥ −0.24 m.

Reason: The algebra permits this interval, but a story that requires x ≥ 0 narrows the contextual domain.

Practice 16. Solve R_A ≥ 30.

Answer: x ≤ 1.20 m.

Reason: The negative coefficient means the inequality direction reverses when you isolate x.

Practice 17. Solve R_B ≤ 170.

Answer: x ≤ 1.12 m.

Reason: This is tighter than the upper bound x ≤ 1.20 from the left reaction condition.

Practice 18. Intersect 0.30 ≤ x ≤ 1.30 and x ≤ 1.12.

Answer: 0.30 ≤ x ≤ 1.12.

Reason: The overlapping part is what satisfies both requirements at once.

Practice 19. Check x = 1.12 in both functions.

Answer: R_A = 40 N and R_B = 170 N.

Reason: This meets the right-reaction threshold exactly and keeps both predicted reactions nonnegative.

Practice 20. Could x = 1.13 meet R_B ≤ 170?

Answer: No; R_B = 171.25 N.

Reason: A position just beyond the boundary gives a value above the invented maximum.

Practice 21. Where do the functions intersect?

Answer: At (0.60, 105) when plotted as x against reaction force.

Reason: Set the two formulas equal, then substitute to find the common y-coordinate.

Practice 22. Write the reaction difference as a function.

Answer: R_A − R_B = 150 − 250x.

Reason: Subtraction of the expressions gives a new straight-line function with units of newtons.

Practice 23. Minimise |R_A − R_B| over 0.30 ≤ x ≤ 1.12.

Answer: The minimum is zero at x = 0.60.

Reason: The absolute difference cannot fall below zero; it reaches zero at the line intersection inside the permitted interval.

Practice 24. Maximise R_A over the same interval.

Answer: R_A = 142.5 N at x = 0.30.

Reason: A decreasing linear function has its largest value at the smallest permitted input.

Practice 25. Maximise R_B over the same interval.

Answer: R_B = 170 N at x = 1.12.

Reason: An increasing function reaches its largest permitted value at the interval’s upper endpoint.

Practice 26. Convert 1.20 m to a 1:10 drawing.

Answer: 12 cm.

Reason: Convert 1.20 m to 120 cm, then divide the length by ten for the scale.

Practice 27. Convert x = 1.12 m to the same drawing.

Answer: 11.2 cm from A.

Reason: Convert 1.12 m to 112 cm and divide by ten. The scale is separate from the unit conversion.

Practice 28. Find the gradient through (0.40,130) and (1.00,55).

Answer: −125 N/m.

Reason: The difference in outputs is −75 N over an input change of 0.60 m.

Practice 29. Recover the R_A line’s intercept from x = 0.40, R_A = 130.

Answer: 180 N.

Reason: Use y = −125x + c, so 130 = −50 + c. Hence c = 180.

Practice 30. State the true x interval for 1.10 m to the nearest 0.02 m.

Answer: 1.09 ≤ x < 1.11 m under the stipulated tie convention.

Reason: Half of the 0.02 m rounding step is 0.01 m; the upper half-way point is excluded under the convention used.

Practice 31. Find the R_A interval for that x interval.

Answer: 41.25 < R_A ≤ 43.75 N.

Reason: R_A decreases with x, so its output bounds reverse the input ordering and endpoint inclusion.

Practice 32. Find the R_B interval for that same x interval.

Answer: 166.25 ≤ R_B < 168.75 N.

Reason: The increasing function preserves the input ordering. Do not combine incompatible endpoint outputs as though simultaneous.

Practice 33. Can 1.12 m reported to the nearest 0.02 guarantee R_B ≤ 170?

Answer: No.

Reason: Its possible true range includes positions above 1.12, at which the model predicts R_B greater than 170 N.

Practice 34. Solve R_A ≥ 100.

Answer: x ≤ 0.64 m.

Reason: From 180 − 125x ≥ 100, derive −125x ≥ −80 and reverse the direction on division.

Practice 35. Solve R_B ≥ 125.

Answer: x ≥ 0.76 m.

Reason: From 30 + 125x ≥ 125, derive 125x ≥ 95. It conflicts with x ≤ 0.64.

Practice 36. Conclude whether those last two conditions can hold together.

Answer: No value of x satisfies both.

Reason: The intervals x ≤ 0.64 and x ≥ 0.76 have no overlap. A valid answer says the model has no feasible solution for that pair.

34. Extended application: explain a complete decision

The fictional club wants one marker position that appears within the 0.30 m to 1.30 m drawing region, has R_A at least 30 N and R_B no more than 170 N according to the idealised formulas. A complete answer starts by translating the three conditions. The position interval is already given. The left condition reduces to x ≤ 1.20; the right reduces to x ≤ 1.12. Their intersection is 0.30 ≤ x ≤ 1.12. Taking x = 1.00 gives R_A = 55 N and R_B = 155 N, which meet both thresholds. This proves a suitable marker position exists within the mathematical exercise.

Now add measurement: suppose the chosen marker is reported as 1.10 m to the nearest 0.02 m. Its true position lies in 1.09 ≤ x < 1.11 under the stated rounding convention. Across that interval, R_B is at least 166.25 N and less than 168.75 N, always below the invented limit of 170 N. R_A stays between just over 41.25 N and 43.75 N, always above the invented 30 N minimum. The rounded reading is therefore sufficient to establish these two numerical conditions within the idealised model. It does not establish that the rack exists, has been inspected or can carry any real load.

35. Transfer the method to a new context

Replace reaction force with a school club budget. Suppose two categories of expenditure are linked so that A(x) = 180 − 125x and B(x) = 30 + 125x in hypothetical dollars, with x now a share variable in a defined unit. The same linear algebra, intersection and feasibility checks would still work, but the interpretation and units would change. You must not carry the word ‘reaction’ into the new context. This exercise teaches that the mathematical structure is transferable while the physical claims are not.

For a second transfer, choose a different pair of lines whose sum is constant, create an interval restriction and work out where they meet. Then ask a parent or classmate to check that your solution contains a clear variable definition, units, algebraic intersection and practical meaning. A learner who can explain why the interval changes under new data has acquired a method rather than a memorised answer.

36. Official syllabus and earlier learning owners

The official 2027 G3 Mathematics K310 syllabus supplies the examination requirements. For physical interpretation, return to Vol 1549: Physics model and tipping assumptions. For algebraic constraint reasoning in another setting, revisit Vol 1546 and the algebra owner. For graphs and rate-of-change reasoning, use the functions and graphs owner. Learners moving into secondary pathways can refer to the Sengkang PSLE route. All practice values and restrictions here are invented classroom examples and are not instructions to inspect or load a real structure.