Two faded colour marks appear on separate pieces of paper from a fictional school-library archive. A student wants to know whether the marks contain similar colouring substances. Looking at the shades is not enough: mixtures can look alike, and a substance that appears different in one light may leave a similar colour on another paper. G3 Chemistry offers a better question. Under controlled conditions, how can paper chromatography separate visible components, and what may a chromatogram actually show?
This learner’s guide follows a complete archive-ink investigation from the first fair comparison to a carefully limited conclusion. You will practise solvent choice, pencil baselines, placement of the sample, development of the chromatogram, solvent-front measurement, Rf calculation, comparison with known samples and sources of error. The ink marks, measurements and archive are invented classroom scenarios. Any physical laboratory work must be performed only under school-approved supervision with suitable materials, risk assessment and disposal arrangements.
Quick information: 2027 standalone G3 SEC Chemistry is K324 (previous reference 6092). Its theory and practical papers assess not just facts but observation, accurate measurement, analysis and evaluation. Paper chromatography and comparison of Rf values are named in the official syllabus. Matching Rf values under the same conditions can support a provisional comparison; they do not prove two unknown substances are identical.
1. From a stain to a scientific question
A stain is an observation; an explanation of what produced it is a hypothesis. That difference matters because the same visible colour can come from different combinations of colouring substances. A dark blue mark might contain one pigment or several dyes, and a differently coloured mark might share one component with the blue one. Chromatography offers a way to separate components in a mixture because they interact differently with the moving solvent and the stationary paper under the selected conditions.
Our fictional library archivist has two unlabeled notes, X and Y. The archivist is not investigating a crime, identifying a student or attempting to attribute authorship. The questions are simply educational: ‘Does the sample appear to contain more than one mobile coloured component?’ and ‘Do samples X and Y show components at comparable positions under the same laboratory conditions?’ These are narrower than ‘Are the notes from the same pen?’ The latter would require much more evidence about formulations, writing conditions and alternative explanations.
Strong Chemistry starts by writing a question that can be answered by the proposed measurements. If the method can reveal separated coloured spots, ask about those spots and their relative movement. Do not ask it to reveal age, authenticity, ownership or chemical identity with certainty. A practical method is useful only when its limitations match the conclusion you intend to draw.
2. The 2027 G3 Chemistry assessment map
Under SEAB’s first SEC examinations in 2027, G3 Chemistry is listed as K324, with 6092 shown as the pre-2027 code for reference. The official K324 syllabus requires three papers. Paper 1 is 40 compulsory multiple-choice questions over one hour and contributes 30%. Paper 2 is structured and free response, one hour 45 minutes, 80 marks and 50%. Paper 3 is the one-hour-50-minute practical, 40 marks and 20%. The syllabus sets out planning, manipulation, measurement and observation, presentation of data, analysis, conclusions and evaluation as practical skill areas.
Do not mistake this for every G3 Science combination. The official 2027 G3 syllabus list, updated 26 October 2026, identifies standalone Physics K323, Chemistry K324, Biology K325 and three combined-Science pairings K326, K327 and K328. Your actual entry must match your school’s registration. A learner taking Science (Chemistry, Biology) should read that combined syllabus for its examination arrangements rather than borrow all the standalone Chemistry paper weights.
Paper chromatography is included in the K324 section on separation and purification, along with interpreting chromatograms and using retention-factor values. The same syllabus also requires thinking scientifically about methods, results and their constraints. That is why this guide does not stop after ‘draw a pencil line’. It takes the observation all the way to an evidence-based explanation.
3. The basic mechanism in words you can picture
A strip of suitable chromatography paper holds a small spot of soluble colouring material near its bottom edge. The lower part of the paper contacts an approved solvent, while the sample spot begins above the liquid surface. The solvent rises through the paper. Components of the sample may dissolve in the solvent, move with it and interact with the paper. Differences in the balance of these effects can cause components to travel different distances.
It is tempting to say ‘heavy molecules stay at the bottom and light molecules go higher’. That blanket rule is not a sound explanation of ordinary paper chromatography at this level. Relative movement depends on the particular substances, solvent and stationary phase. Students should describe the observed separation in terms of different affinities or solubilities, without claiming a universal mass ranking that the test has not established.
The moving liquid is called the mobile phase. The paper functions as the stationary phase in the school model; more detailed accounts may discuss the stationary water associated with cellulose, but you do not need to invent a complicated mechanism when the question asks for a simple account. State what moves, what remains fixed and why components may separate. Accurate basic language creates room for advanced interpretation later.
4. Make the comparison fair before doing any arithmetic
If samples X and Y are to be compared, place them on the same sheet or use otherwise closely matched conditions. The paper type, solvent, development time, starting line and measurement method should be comparable. When the solvent front moves to different positions, raw distances alone may mislead. When different solvents are used, two substances may have different relative movements, even if they are chemically the same. That is why a matched Rf under similar conditions is a useful clue, not an infallible identifier.
A good plan records the independent variable—the sample being tested—and the dependent observations, such as number of visible spots and their migration distances. Controlled factors include the solvent used, paper type and starting position. Repeated work or standards may help assess reliability. If the objective is to test the effect of solvent composition, then solvent composition becomes the independent variable and other relevant factors must remain controlled.
Avoid phrases such as ‘keep everything the same’ without listing anything. Examiners can reward a concrete control much more readily than a vague intention. Say ‘Use the same solvent and chromatography paper for the known and unknown samples’ or ‘Measure each spot from the original baseline in the same way’. That level of detail turns a general principle into an assessable experimental plan.
5. Why the starting line is drawn in pencil
The origin line is a measurement reference. A line drawn in pencil is usually appropriate because the graphite does not dissolve and migrate like many inks do in common school solvents. An ink-drawn baseline could add its own colouring components to the chromatogram and confuse the results. Keep the marks small and the sample positions distinguishable. If several substances are spotted, label their starting locations on the paper in pencil, in a way that does not become confused with the developed spots.
The starting line should be above the solvent surface. If the sample begins submerged in the liquid, material can dissolve directly into the reservoir rather than being carried up the paper in the intended way. The paper should remain arranged so the front can travel upward without the sample being washed away at the beginning. The origin, spots and solvent front are parts of a measurement system, not merely the appearance of a nice diagram.
A pupil may correctly recite ‘use pencil’ yet forget why. The useful explanation has a causal chain: pen ink may dissolve in the solvent, move along the paper and interfere with sample spots; graphite is less likely to create that confusion under the chosen conditions. Connecting the precaution to the threat it prevents is stronger than memorising the step alone.
6. The solvent front is a temporary piece of evidence
When the developing run ends, the leading edge of the solvent may become hard to see as the liquid evaporates. The analyst therefore needs a marked solvent-front position at the appropriate time. In a worked paper question, this front is normally shown or described. It is essential for the retention-factor calculation because the spot distance and solvent-front distance share a starting point.
Measure vertically along the travel direction from the origin line, not from the bottom edge of the paper. A spot that begins 2 cm above the paper edge and ends at 5 cm above the edge has moved 3 cm from the baseline, not 5 cm. If the solvent front moves 8 cm from that baseline, the correct ratio is 3/8, not 5/8. This simple origin error can spoil an otherwise correct response.
If the paper curls or the solvent front is uneven, measurements may be less reliable. Rather than pretend precision, explain what feature makes the reading difficult. A clean practical record includes distances with appropriate units and a diagram showing the baseline and front. In an actual school practical, the teacher’s laboratory instructions and safety requirements take priority over any simplified description here.
7. Define and calculate the retention factor correctly
The retention factor, written Rf, is the distance travelled by a selected component spot from the starting line divided by the distance travelled by the solvent front from the same starting line. Both distances must have the same length unit and be measured in the same direction along the paper. Under the usual definition, the ratio is dimensionless. A value such as 0.40 does not carry the unit cm. If the top of the solvent front is 8.0 cm from the origin and a spot centre is 3.2 cm from the origin, Rf = 3.2/8.0 = 0.40.
Now suppose a second spot travels 5.6 cm while the solvent front again travels 8.0 cm. Its Rf is 5.6/8.0 = 0.70. These two ratios provide a compact way to describe the locations of two separated spots under the stated conditions. They do not name the chemicals. They also do not say that the first spot represents 40% of the mixture. Distance fraction and mass fraction are completely different quantities.
Before calculating, ask three questions. Have I measured from the same origin? Have I paired the component with its own solvent-front run? Are the units consistent? That prevents a surprisingly large range of mistakes. A calculator is not a defence against choosing the wrong lengths.
8. Compare a known reference and an unknown mixture
Imagine a school-approved reference dye mixture R develops two visible spots at distances 3.2 cm and 5.6 cm from the baseline with an 8.0 cm solvent front. Its Rf values are 0.40 and 0.70. An unknown archive sample X, developed under the same fictional conditions, shows spots at 3.2 cm and 5.6 cm. This supports the statement that X and R contain components with matching migration behaviour in the chosen test. It does not prove that every molecule in the two samples is identical.
Suppose unknown Y instead shows spots at 3.2 cm and 6.4 cm, giving Rf values 0.40 and 0.80. A defensible comparison says X and Y share an observed component position at 0.40 but differ in their other visible component positions. The phrase ‘share an observed position’ is deliberate. Two chemically different substances might give similar Rf values in a particular solvent system. Some components may fail to become visible.
Good answers separate three operations: identify the number of resolved spots, calculate or compare the ratios, and state the limited conclusion. An answer that simply says ‘same colour means same ink’ ignores the method. An answer that says ‘same Rf proves same compound’ ignores its limitations. Neither earns the confidence of a thoughtful scientist.
9. What exactly can the number of spots tell you?
A chromatogram with more than one resolved spot can show that the tested sample contains more than one mobile, visible component under the conditions used. Yet the number of visible spots is not necessarily the number of all chemical substances present. A mixture may contain colourless compounds that are not detected without a suitable locating method. Several components may travel together and appear as one spot. A sample might be insoluble in the chosen solvent and remain near the origin.
The syllabus specifically includes an understanding of why locating agents can be needed for colourless compounds, without requiring detailed knowledge of particular agents. In an exam explanation, say that a colourless component may be present but not visibly identifiable on the developed paper until a suitable locating method reveals it. Do not invent a specific reagent unless the question supplies it or the approved classroom method has taught it.
If one coloured spot appears, you cannot automatically claim chemical purity. The observation is more modest: one spot was resolved under the conditions of this experiment. This matters especially when discussing medicines, food-related substances or unknown environmental samples. Chromatography can be powerful evidence, but a simple classroom image is not a complete chemical analysis of an unidentified substance.
10. Different solvents can produce different evidence
A substance that moves 0.40 of the solvent-front distance with one solvent may move differently with another. The balance between solubility in the mobile phase and interaction with the stationary phase changes. That does not mean the substance has transformed into another chemical. It means the separation conditions changed. Therefore, Rf values from different methods should not be compared as though they were universal fingerprints.
Suppose X and reference R appear to match in solvent system A. A follow-up with an appropriate different solvent might give another useful comparison. If the patterns still agree, confidence in a relationship may improve, though it still does not constitute absolute proof of identity. If they diverge, the original match might have been misleading or the experimental conditions might have differed. The proper response is to investigate, not to conceal inconvenient observations.
Students often prefer a method that always gives one clear answer. Science is more realistic: a method is useful because it allows a carefully qualified judgement. In a structured question, state the change of solvent as a variable and describe what would be kept consistent. Avoid giving instructions for choosing or handling unfamiliar hazardous solvents outside a supervised laboratory.
11. Method choices should answer the problem, not decorate it
Chromatography is not the correct separation method for every mixture. Insoluble solid in liquid? Filtration may be appropriate. Recovering a dissolved solid from a suitable solution? Crystallisation or evaporation may be useful. Separating miscible liquids with sufficiently different boiling characteristics may call for distillation or fractional distillation. Separating immiscible liquids may use a separating funnel. These methods exploit different properties. The question should decide the method; a student’s favourite practical should not.
Our ink comparison is suitable for a chromatographic teaching model because the interest is in resolving and comparing mobile components of a mixture. It would make little sense to suggest pouring the two marks through a kitchen filter and claiming that the outcome would identify the dyes. Similarly, a single boiling point cannot generally identify a complex mixture on its own. Each technique has a claim it can support and a claim it cannot.
The eduKate Sengkang separation-techniques article gives a wider comparison across filtration, evaporation, crystallisation, distillation and chromatography. Volume 1447 applies separation and purity thinking to a fictional refill-station problem. This volume has a more precise owner: interpreting chromatograms and retention factors in a comparison of archive inks.
12. Sources of error: trace each one to the answer
A sample spot that is too large may produce smeared or overlapping bands. If components are poorly resolved, the reader may count too few distinct spots or measure an uncertain centre. A sloping or uneven solvent front may complicate the reference distance. An incorrectly marked origin shifts the starting point for every ratio. A sample that is not adequately soluble in the mobile phase may fail to move. A different paper or solvent between samples can undermine direct comparison.
For each weakness, state both the effect and an appropriate repair. ‘Make smaller, consistent starting spots’ is a reasonable response to smearing caused by oversized spots. ‘Mark the solvent front promptly and measure from the baseline’ addresses an ambiguous reference distance. ‘Develop known and unknown samples in the same appropriate solvent system’ improves comparability. Vague statements such as ‘be more careful’ are not as useful because they do not identify the failure mechanism.
Think of error analysis as causal reasoning. If the wrong answer is a high Rf, ask whether the spot distance was overestimated, the solvent front underestimated, or the wrong run paired with the spot. If the issue is a mistaken conclusion of identity, the error may be interpretive rather than numerical. No amount of additional decimal places fixes an unjustified conclusion.
13. A fully worked diagnostic problem
A student tests three fictional samples. The solvent front travels 10.0 cm from the baseline. Sample P shows visible spots centred at 2.0 cm and 6.0 cm; sample Q shows 2.0 cm and 7.5 cm; sample R shows one visible spot at 6.0 cm. Calculate the Rf values before deciding anything about the substances. P has 0.20 and 0.60; Q has 0.20 and 0.75; R has 0.60. All values are ratios and have no length unit.
Question one: which two samples display a spot at the same Rf of 0.20? P and Q. Question two: which other two samples share a spot at 0.60? P and R. Question three: which samples show evidence of more than one resolved visible component? P and Q. Question four: can the experiment prove that R contains only one chemical substance? No. It shows only one visible resolved spot under the specified conditions. Question five: why do we need the solvent-front distance? Because the relative migration ratio uses that reference.
Question six: if Q is developed on a separate paper with a different solvent, can the values be compared directly with P’s as though conditions were the same? No. The test conditions affect migration. A strong answer does not say that comparison is impossible in every circumstance, but explains why an uncontrolled solvent change prevents a like-for-like interpretation. This mini-case distinguishes sound calculation from sound chemistry.
14. From observation to conclusion in practical writing
A good result paragraph might say: ‘In the invented test, sample X gave two resolved coloured spots with Rf values of 0.40 and 0.70. Reference R showed spots at the same positions under the stated conditions. This pattern is consistent with shared components, but chromatography alone does not establish complete chemical identity.’ The first sentence reports, the second compares, and the third interprets with a limit. That sequence is easy to follow because each new claim has an evidence source.
Avoid writing: ‘X was proved to be the same ink because both were blue.’ It discards the chromatogram and inflates the conclusion. Avoid also: ‘Nothing can be learned because the method is imperfect.’ That discards evidence that may still be useful. Scientific judgement lies between these extremes. You can learn something real from a limited observation without claiming a complete answer.
When the task provides a chromatogram diagram rather than asking you to perform a practical, use its measured positions and labels. Make your calculations clear enough for a marker to check. Include an explanation of the method only if the question asks for one. Writing everything you know about chromatography can waste time when the examiner is testing a targeted skill.
15. Paper 1, Paper 2 and Paper 3 demand different habits
For standalone K324, Paper 1 uses multiple-choice questions. An ink-chromatography item might ask which setup keeps the sample line above the solvent, which spot has a stated Rf, or what inference is justified by a diagram. Check options against the physical principle rather than picking a familiar phrase. A statement can be wrong because it swaps the baseline and the bottom edge or because it changes a tentative comparison into proof of identity.
Paper 2 can ask you to explain, calculate, interpret and evaluate in structured or free-response form. Show the ratio, label distances and connect your conclusion to the evidence. The syllabus indicates a significant data-based element in Paper 2, so practise reading unfamiliar tables and methods instead of only repeating textbook diagrams. In Paper 3, expect to demonstrate practical skills specified by the syllabus, under the actual task instructions and supervised examination conditions. Planning, observation, presentation and evaluation all matter.
A common revision mistake is to prepare only for a remembered technique. The actual paper may present a new substance, a different chromatogram or a mixed-method question. Your defence is understanding the underlying definitions and their scope. The science lab-report guide can help you strengthen observation and conclusion writing outside the specific context of ink.
16. Use mathematics carefully in a chemistry context
The formula looks simple, but the meaning is chemical. If a spot moves 4.5 cm and the solvent front moves 7.5 cm from the same baseline, Rf = 4.5/7.5 = 0.60. A pupil who instead divides 7.5 by 4.5 obtains about 1.67. That calculation may be correct arithmetic, but it reverses the defined ratio and is not the required retention factor for the chromatogram. Check that the numerator is a component distance and the denominator is the solvent-front distance.
If distances are measured in millimetres, the same principle applies. A 45 mm spot and a 75 mm solvent front yield 45/75 = 0.60. You do not need to convert both to centimetres when the units already match, though doing so consistently would also work. If one distance is in centimetres and the other in millimetres, convert before dividing. This is a small application of ratio and unit discipline.
For further mathematical habits involving measurement and distributions, see Volume 1452. But do not turn this chemistry page into an independent mathematics owner. The mathematics is a tool used here to report relative migration, while the main understanding concerns how and why the chromatographic pattern can be interpreted.
17. Avoid turning a fictional archive into a forensic conclusion
The word ‘archive’ can make the investigation sound like detective work. Real document examination, ink attribution and authenticity questions can involve specialised procedures and standards beyond a school chromatography exercise. Our sample has no claim about who wrote anything, whether a document is genuine, or whether a substance is safe. The educational task is to explain the behaviour of mixtures and to measure the positions of separated spots.
A particularly serious mistake would be to claim that matching migration proves that two marks came from the same person. A shared component in two inks is not evidence of authorship. Even if a method eventually supported a conclusion about material composition, it would not by itself establish the identity of a writer. Scientific reasoning stays with what the method actually measures.
The broader lesson is useful across examinations. Separate observation, comparison and inference, and identify the limits of each. It is possible to write a persuasive answer that is still wrong because its claims extend beyond the evidence. The more advanced your scientific vocabulary becomes, the more carefully you should check the sentence you are asking it to support.
18. Revision sequence: start small and add one challenge at a time
Session one: explain a mixture and why separation may reveal components. Session two: draw a properly labelled baseline and solvent-front diagram. Session three: identify what stays fixed and what changes when comparing two samples. Session four: calculate Rf from one spot. Session five: calculate and compare two spots and a known reference. Session six: interpret a chromatogram with overlapping or invisible components. Session seven: diagnose three deliberate errors in the method. Session eight: produce an evidence-bounded conclusion in three sentences. Session nine: attempt an unfamiliar data-based problem. Session ten: explain the result aloud without reading the model answer.
This sequence is a suggested teaching programme, not an official SEAB schedule. Adapt it to the student. If the arithmetic is confident but the inference is weak, spend more time on ‘supports’ versus ‘proves’. If the drawing is accurate but the explanation is vague, require the student to name the stationary and moving phases and describe why conditions matter. If vocabulary is the obstacle, practise a small group of terms—baseline, solvent front, component, separation, retention factor—in complete sentences.
Parents do not need to buy or handle chemical supplies for home practice. Printed fictional chromatograms and spoken explanations can teach a great deal safely. For practical technique, rely on the school’s supervised laboratory learning and approved apparatus. The aim is competence and understanding, not an unsupervised experiment at home.
19. Final independent questions and a route onward
Try an unseen numerical example. A spot moves 18 mm and the solvent front moves 60 mm: calculate the Rf, obtaining 0.30. A second spot moves 42 mm with the same solvent front, giving 0.70. If a reference sample shows one spot at 0.70 under the same conditions, it has a matching observed position with the second component. Does that guarantee chemical identity? No. If the reference was developed in a different solvent, can you still assume the matching values mean the same thing? No. Explain which experimental condition has changed and why it matters.
Next, write two conclusions. The first should be deliberately overconfident; the second should be corrected by adding the right scope and limits. For example, replace ‘These inks are identical’ with ‘These samples produced matching visible migration positions in this controlled chromatogram, a result consistent with some shared components.’ The improvement is not merely cautious wording. It restores the relationship between data and claim.
For the general separation-method route, use Advanced Science Tutorials. For practical-report structure, use SEC Science Lab Reports. For the earlier multi-method treatment, use Volume 1447. For a model of cross-subject limits, use Volume 1454. A new archive-label Mathematics problem can now develop the measurement, scale and purchasing skills needed to present the hypothetical archive clearly without confusing the Chemistry conclusion.
20. Sources and reader-safe limitations
The official basis for subject codes and methods is SEAB’s 2027 G3 syllabus catalogue and the 2027 K324 Chemistry syllabus. The catalogue was updated on 26 October 2026. Recheck the official documents for any later year. All samples, distances, archive records and ‘known’ dyes in this guide are fictional examples, not official SEAB questions and not claims about real documents. Do not perform solvent work without the school’s supervision, procedures and risk controls. This guide contains only text and explanatory links.