A timetable turns a Physics quantity into a Mathematics decision
A learner may calculate that a lamp consumes 0.36 kilowatt-hours and still be uncertain how to run several lamps within a budget. Mathematics makes the operating plan explicit. How many lamps are used? How many hours each day? How many days are billed? How does a fixed spending limit constrain the schedule? This guide follows the preceding G3 Physics lighting investigation and turns its power and energy measurements into equations, tables, graphs and reasoned choices.
The Singapore-Cambridge Secondary Education Certificate starts in 2027. The G3 Mathematics syllabus is K310 (previous reference 4052), alongside English K300 and Physics K323 in the 2027 G3 directory. The official SEAB list and K310 Mathematics syllabus govern the national examination details. The greenhouse budget here is fictional; it is a teaching model, not a current electricity-price quote or commercial advice.
Learning route: identify variables and units; express energy as an algebraic formula; convert watts to kilowatts; form a cost equation; use graphs and tables; solve an inequality with an operating-hours constraint; compare capital and running costs; test percentage claims; check feasible whole-number decisions; and explain why numerical feasibility is not automatically a biological or safety approval.
Write the model before using the numbers
Let n be the number of identical lamps, W the power of each lamp in watts, h their operating hours per day and d the number of days. The total energy in kilowatt-hours is E = nWhd / 1000. The division by one thousand converts watts to kilowatts. If p is an assumed price per kilowatt-hour, the estimated energy-only cost is C = pE. These equations begin as simple models of constant operation; their variables must be defined in a complete answer.
Suppose four 72 W lamps run five hours per day for thirty days. E = (4 × 72 × 5 × 30)/1000 = 43.2 kWh. If p = S$0.30/kWh, C = S$12.96. The model deliberately excludes any equipment that was not specified, such as ventilation or a control system. An examiner can assess the calculation only when the student makes the assumptions clear enough to follow.
Students should not treat the model’s letters as empty algebra. n counts lamps and must be a non-negative whole number; h represents hours per day and cannot exceed the hours available in a day; d counts days in a particular planning period; p is an assumed rate. These meanings help identify impossible numerical results after solving an otherwise correct equation.
Build a cost function in one variable
Keep n = 4, W = 72, d = 30 and p = 0.30. Then C = 4 × 72 × h × 30 × 0.30 / 1000 = 2.592h, measured in Singapore dollars under the assumed tariff. For h = 0 the lighting energy charge in this simplified model is zero; for h = 5 it is S$12.96; for h = 6 it is S$15.552. Each additional daily hour over the stated month adds S$2.592 in this model.
Plotting cost against daily operating hours produces a straight line through the origin under the constant-rate assumption. The gradient is the increase in monthly charge per extra daily hour. It is not the physical power rating and not the cost of purchasing the lamps. A graph should label h in hours per day and C in dollars per month for the stated thirty-day period.
If a fictional fixed monthly equipment charge of S$5 is added, the graph becomes C = 5 + 2.592h, with a non-zero intercept. The distinction between a cost that varies with use and a fixed charge is essential to interpreting linear models. We are not claiming that a real Singapore tariff necessarily has this form; the question supplies the assumptions.
Use a budget as an inequality
Suppose the classroom planning budget is at most S$15 for lighting energy over thirty days. With C = 2.592h, the constraint is 2.592h ≤ 15. Dividing gives h ≤ 15/2.592, approximately 5.79 hours per day. If the team can schedule only whole hours, five is the greatest permissible whole-number value. If fractions of an hour are allowed, a schedule must still respect the calculated limit.
Students often stop at h = 5.79 without considering the context. An answer should say whether the inequality is an upper limit, whether the variable must be an integer and whether the result meets other requirements. A negative running time or a proposed twenty-six-hour day may solve some algebraic expression but cannot be a feasible schedule.
Change one assumption and solve again. If the number of lamps rises, the maximum allowable hours fall under the same budget. If the rate is higher, the feasible time also falls. Reading the equation qualitatively before using a calculator helps a pupil detect surprising answers that signal a wrong operation or a misplaced conversion.
Compare schedules without confusing intensity with duration
Four 72 W units running for five hours use 1.44 kWh daily. Five 48 W units running for six hours also use 1.44 kWh daily, because their combined power is 240 W and 240 × 6 / 1000 = 1.44 kWh. The two plans match in daily electrical energy but differ in lamp count, rated power and hours. Equality of energy does not establish equality of measured illumination or crop response.
The calculation illustrates why ‘lower wattage always saves more money’ is incomplete. A lower-power unit can be operated longer, or more units can be used. Compare total power multiplied by total duration. A percentage reduction in the rating of one lamp is not automatically the same percentage reduction in a whole-system electricity bill.
A strong evaluation states the relevant objective. If the question asks only which plan meets a stipulated energy budget, the equality is useful. If it asks which plan is suitable for a crop, the model lacks distribution and biological information. Recognising missing variables is a mathematical judgement, not a failure to provide an answer.
A second cost: purchase price
Operating charges are not the only costs. Suppose fictional lamp A costs S$60 to buy and consumes 72 W, while lamp B costs S$80 and consumes 50 W. Four units are purchased and each plan runs five hours per day for thirty days at the assumed S$0.30/kWh. A costs S$240 initially and B costs S$320. The purchase difference is S$80, which must not be added to a monthly energy amount without labelling the time period.
Monthly energy use for A is 43.2 kWh, while for B it is 30 kWh. At the assumed rate, A costs S$12.96 per month for electricity and B costs S$9.00. The hypothetical monthly difference is S$3.96. Dividing the S$80 extra purchase cost by S$3.96 gives about 20.2 months, a simple illustrative break-even time under unchanged assumptions.
This calculation ignores lamp lifespan, maintenance, changing tariffs, financing, installation and whether the two devices satisfy the same performance requirement. A student should not convert the simplified payback into a promise of savings in a real greenhouse. The useful skill is recognising which costs are one-off and which repeat, then explaining the boundary of the model.
Percentage comparisons need the right denominator
Reducing a lamp rating from 72 W to 60 W is a difference of 12 W. Relative to the original 72 W, the reduction is 12/72 × 100%, or approximately 16.7%. If the operating time and number of lamps stay the same, the model predicts a 16.7% reduction in their lighting energy. If any of those conditions change, the percentage of the total energy bill need not be the same.
Another common error is to divide by the new 60 W value, which produces 20%. That figure answers a different question: 12 is twenty per cent of 60. To report a percentage decrease from an original value, use the original value as the denominator. Write ‘relative to’ in the explanation so the comparison base is unambiguous.
When a promotional claim states ‘save twenty per cent’, ask what is being compared: rated power, energy for a fixed schedule, electricity-only cost, full system cost or total greenhouse expense. A percentage without a defined base is not enough evidence to decide.
How the 2027 Mathematics papers use reasoning
The published 2027 K310 scheme includes Paper 1, two hours fifteen minutes, 90 marks and 50% weighting, with about 26 short-answer questions. Paper 2 is also two hours fifteen minutes, 90 marks and 50%, with 9–10 questions of varying lengths; its final question focuses specifically on applying mathematics to a real-world scenario. Candidates answer all questions in both papers. The syllabus says omission of essential working loses marks.
The greenhouse model is not a prediction of a particular Paper 2 question. It is practice in the underlying processes: translate a narrative into variables, select operations, solve equations, interpret inequalities and justify a conclusion. Pupils should practise both quick calculations and sustained multi-stage interpretation instead of assuming that a longer word problem must contain a trick.
Keep working legible. State the formula, substitute numbers, convert units, solve the relationship and interpret the outcome in the given context. When a graph or table is supplied, extract its precise meaning rather than replacing it with an unrelated memorised method.
The revision ladder
Start with mental unit sense: one kilowatt is one thousand watts and one kilowatt-hour is the energy used by a one-kilowatt load over one hour. Next practise one-variable substitution. Then change the unknown: solve for h from a cost cap rather than always calculate C. After that introduce two alternatives, a fixed charge and an integer condition. Finally write a brief decision that distinguishes mathematical feasibility from practical suitability.
The Vol 1371 Physics guide provides the electrical foundation. Students who need earlier practice can use the PSLE learning guide, the SEC Mathematics one-page maps and the G3 English–Mathematics–Science route. The next volume will practise explaining the same planning question in spoken English without overstating the evidence.
Twenty-nine original examination and transfer exercises
These are fictional teaching problems rather than official past-paper questions. Work them without looking at their answers. For every numeric result, show your method and relevant units; for every judgement, state the assumptions that make the conclusion valid.
Exercise 1: Conversion check
Task. A fixture is labelled 125 W. Convert its power to kilowatts, and calculate its energy over four hours.
Worked reasoning. 125 W equals 0.125 kW. Over four hours it uses 0.125 × 4 = 0.5 kWh. Write the unit after each number: 0.125 is the power in kW and 0.5 is the energy in kWh. Multiplying 125 by four produces 500 Wh, which is also 0.5 kWh; it does not produce 500 kWh. Check the size before moving on.
Exercise 2: Several fixtures
Task. Three 80 W fixtures run six hours per day. Find the energy consumed in one day and ten days.
Worked reasoning. Combined power is 240 W = 0.240 kW. Daily energy is 0.240 × 6 = 1.44 kWh. Over ten days it is 14.4 kWh. Each factor has a meaning: count, power, hours per day and days. Write the factors in an organised line so that the ten-day multiplier cannot accidentally be applied twice.
Exercise 3: Daily schedule change
Task. Four 72 W lights currently run five hours per day. What is the change in daily energy when the schedule rises to six hours?
Worked reasoning. Combined power is 0.288 kW. One additional operating hour uses another 0.288 kWh each day. At an assumed S$0.30 per kWh this adds S$0.0864 per day. The answer should be a change, not the full six-hour total. Identifying what was changed is as important as substituting in the energy formula.
Exercise 4: Thirty-day cost
Task. Four 72 W lights operate six hours daily for thirty days at S$0.30 per kWh. Calculate the energy-only charge.
Worked reasoning. Energy = 4 × 72 × 6 × 30 / 1000 = 51.84 kWh. Cost = 51.84 × 0.30 = S$15.552, or S$15.55 to the nearest cent. This is a fictional tariff exercise. Do not include buying the lights as a monthly running cost. State that the answer is based on constant operation at the provided power.
Exercise 5: Solve for time
Task. C = 2.592h models a monthly cost in dollars. Find h when C = 12.96.
Worked reasoning. Divide 12.96 by 2.592 to obtain h = 5 hours per day. Check by substituting: 2.592 × 5 = 12.96. A useful habit is to interpret a solved symbol before writing the final answer. Here h is not total monthly hours; it is average hours per day over the stated thirty-day planning period.
Exercise 6: A budget limit
Task. Under C = 2.592h, the budget is at most S$15. Solve the inequality and give the greatest whole number of daily hours.
Worked reasoning. 2.592h ≤ 15, so h ≤ 5.787… hours per day. If only complete hours are allowed, the maximum is five. Six hours would cost S$15.552 and breach the cap. Do not round the mathematical upper bound upward to six just because 5.787 is close to six. Feasibility is an inequality, not ordinary nearest-integer rounding.
Exercise 7: Reverse the budget
Task. A six-hour schedule is required for four 72 W fixtures over thirty days. What minimum energy-only budget is needed at the exercise rate?
Worked reasoning. The energy is 51.84 kWh, so the required budget is at least S$15.552 under the stated price. Express the budget condition as B ≥ 15.552, or at least S$15.56 if money must be allocated in cents without falling below the amount. A cost figure and a spending limit are not the same kind of quantity; read what the question asks.
Exercise 8: Multiple devices
Task. A plan has three 60 W fixtures and a 40 W controller, all operating for four hours per day. Find the daily total.
Worked reasoning. Combined rated power is 3 × 60 + 40 = 220 W = 0.220 kW. In four hours the estimated energy is 0.880 kWh. Do not ignore the controller if the question explicitly includes it, and do not add an imagined fan if the question does not. Modelling begins with the boundary specified by the problem.
Exercise 9: Alternatives with equal energy
Task. Compare four 72 W fixtures for five hours with five 48 W fixtures for six hours.
Worked reasoning. Plan A uses 4 × 72 × 5 / 1000 = 1.44 kWh daily. Plan B uses 5 × 48 × 6 / 1000 = 1.44 kWh daily. They consume equal electrical energy under the rating assumptions. They do not necessarily provide the same illumination pattern, safety or biological result. A sound mathematical comparison names the equality and its limits.
Exercise 10: Percentage decrease
Task. A lamp rating falls from 72 W to 60 W. Find the percentage decrease relative to the original.
Worked reasoning. Decrease = 12 W. The original denominator is 72 W, so the percentage is 12/72 × 100 ≈ 16.7%. Dividing by 60 would answer a different question. If lamp count and operating time remain unchanged, the same relative change applies to their modelled energy consumption; otherwise it may not apply to the whole system.
Exercise 11: Percentage increase
Task. A time schedule grows from four to five hours daily. By what percentage does energy use grow if all else stays unchanged?
Worked reasoning. The duration rises by one hour from a base of four, so the percentage increase is 1/4 × 100 = 25%. The modelled electrical energy also rises by 25% under constant power. An increase from five back to four hours would be a 20% decrease, because the base changes. Percentages always require a clearly identified original quantity.
Exercise 12: Different tariff
Task. The exercise tariff rises from S$0.30 to S$0.33 per kWh. What is the percentage price increase?
Worked reasoning. The increase is S$0.03, divided by the original S$0.30 to give 10%. If energy consumption remains constant, the modelled energy charge rises by the same percentage. Do not claim the entire actual utility bill must rise exactly 10%, because the question does not specify other charges or changing consumption.
Exercise 13: Read a gradient
Task. A cost line is C = 2.592h. What does its gradient mean?
Worked reasoning. For the stipulated number of lamps, wattage, days and assumed tariff, each extra hour per day adds S$2.592 to the monthly energy-only estimate. The gradient has units of dollars per added daily operating hour over that month. It is not the power rating of an LED and not the price of purchasing it. Context matters when interpreting a slope.
Exercise 14: Fixed cost
Task. A fictional monthly service charge is S$5. Write the cost equation when variable lighting cost remains 2.592h.
Worked reasoning. The new model is C = 5 + 2.592h. At h = 0, the equation still predicts S$5 because that term represents a fixed charge. A pupil who writes C = 5h + 2.592 misunderstands what remains constant. This is an algebra exercise, not a claim about how Singapore electricity retailers actually price energy.
Exercise 15: Solve with a fixed cost
Task. Under C = 5 + 2.592h, the total cap is S$20. Find the maximum allowable h.
Worked reasoning. Subtract the fixed charge first: 2.592h ≤ 15. Then divide to obtain h ≤ 5.787… . If scheduling requires whole hours, five is feasible but six is not. A common error is applying the full S$20 to the variable part without reserving the S$5. Show both algebra and the final contextual interpretation.
Exercise 16: Initial investment
Task. Four A lamps at S$60 each are replaced by four B lamps at S$80 each. Find the extra initial outlay.
Worked reasoning. A requires S$240 and B requires S$320. The extra purchase cost is S$80. This one-time expense must be kept separate from a monthly electricity estimate until a common period is chosen. An apparent saving may take time to offset higher initial costs; modelling that time requires additional assumptions.
Exercise 17: Monthly energy contrast
Task. Four 72 W lights and four 50 W lights both operate five hours daily for thirty days. Compare their energy.
Worked reasoning. The first plan uses 43.2 kWh and the second uses 30 kWh. Difference = 13.2 kWh. At the exercise rate of S$0.30, the electricity-only difference is S$3.96 per month. These numbers say nothing about whether the different lamps meet the same lighting requirement. Do not replace a performance investigation with an energy comparison.
Exercise 18: Simple payback
Task. The more efficient fictional lamps cost S$80 more to buy as a set and save S$3.96 monthly under fixed assumptions. Estimate simple payback.
Worked reasoning. Divide 80 by 3.96 to obtain approximately 20.2 months. This is a simple break-even calculation, not a complete investment appraisal. It ignores changing electricity prices, maintenance, longevity, financing and the actual adequacy of the illumination. State the assumptions in a conclusion so the reader knows what the quotient represents.
Exercise 19: Unrealistic variable
Task. An equation produces h = 27 hours per day. Why cannot the plan be adopted?
Worked reasoning. The physical context restricts daily hours to at most 24, even before other practical considerations are applied. Algebraic solutions require interpretation. Sometimes the correct final decision is ‘no feasible schedule under these conditions’. Changing the answer to a convenient number without explanation would hide the conflict instead of solving the problem.
Exercise 20: Integer fixtures
Task. A calculation gives n ≤ 4.7 for the number of identical fixtures allowed by a budget. What is the largest feasible n?
Worked reasoning. The count must be a whole number. Four is the largest permitted value if n is non-negative and no other constraint intervenes. Rounding 4.7 to five would violate the inequality. Always distinguish a value being estimated from a maximum permitted by a restriction; the rounding rule depends on the meaning.
Exercise 21: Graph two cost plans
Task. Plan A has C = 4 + 2h and Plan B has C = 10 + h. Interpret their intersection.
Worked reasoning. Set 4 + 2h = 10 + h, giving h = 6. At six hours both equations predict C = 16. The intersection is a break-even duration under the fictional models. Below that value, A is cheaper; above it, B is cheaper. Check which side of the crossing each line occupies instead of assuming the lower intercept stays cheaper for all h.
Exercise 22: Data-table check
Task. A table lists h = 0, 2, 4, 6 with C = 0, 5.184, 10.368, 15.552. Is it consistent with C = 2.592h?
Worked reasoning. Yes. Multiplying each h by 2.592 reproduces the values. The constant increment over every two-hour increase is S$5.184. The table provides a quick way to see linearity under the simplified assumptions. If one value differed, first look for a recording or computation error before announcing a nonlinear relationship.
Exercise 23: Unit consistency
Task. Why is E = nWhd/1000 in kWh only when W means watts and h means hours per day?
Worked reasoning. The watt-to-kilowatt division by one thousand works with hours to give kWh. If time were in minutes, it must first be converted to hours, or the model’s denominator adjusted accordingly. Symbol names are not enough; their units define the equation’s validity. An apparently neat formula can be dimensionally wrong when data use different units.
Exercise 24: A misleading claim
Task. A notice says ‘Our 60 W lamp saves 20% on electricity compared with a 72 W lamp.’ What needs checking?
Worked reasoning. The power reduction relative to the old 72 W rating is about 16.7%, not 20%. Even that reduction predicts a matching energy change only if operating time and lamp count are unchanged. The notice should identify its comparison base and conditions. Checking promotional mathematics is a useful application of percentages and modelling.
Exercise 25: Scope of conclusion
Task. The budget model says both plans cost S$12.96 per month. Does that mean both are equally good for a greenhouse?
Worked reasoning. No. A shared energy-only cost does not establish the same light distribution, equipment safety, crop response, maintenance or reliability. The mathematics answers the cost question posed under specific assumptions. A defensible conclusion reports that equality and lists missing performance evidence. Examinations may assess the boundary between a calculated fact and a broader decision.
Exercise 26: Working and marks
Task. Why can an answer with the right final number lose marks if essential steps are omitted?
Worked reasoning. The 2027 K310 syllabus explicitly warns that omission of essential working results in loss of marks. Equations, substitutions and critical conversions show how the conclusion was reached. An unexplained number also makes it harder to locate and repair a mistaken assumption. Under time pressure, organise working rather than replacing it with a long unstructured paragraph.
Exercise 27: Full examination-style synthesis
Task. A team has four 72 W lamps, thirty days and a S$15 energy cap at S$0.30/kWh. It wants six hours daily. Is the schedule feasible?
Worked reasoning. At six hours, energy is 51.84 kWh and cost is S$15.552. This exceeds the budget by S$0.552, or about S$0.55. The proposed six-hour schedule is not feasible under the stipulated cap. Five hours costs S$12.96 and is feasible financially, but whether it provides sufficient light is a separate question requiring evidence. This is the difference between calculation and judgement.
Exercise 28: Revision transfer
Task. How should a learner check understanding after studying the model?
Worked reasoning. Change the numbers and the unknown. Solve once for energy, once for cost, once for maximum hours and once for the number of lamps. Then write a sentence explaining why the solution is physically feasible and what it cannot establish. The aim is flexible reasoning rather than recognising the specific figures from a worked example.
Exercise 29: From PSLE number sense to G3 algebra
Task. A student handles multiplication correctly but struggles to interpret 2.592h ≤ 15. What should be repaired?
Worked reasoning. Return to the meaning of multiplication, division and an upper bound. Draw a simple number line, test h = 5 and h = 6, then express the inequality algebraically. This uses early number sense as a foundation for new symbols. The presence of letters should not hide the simple question: what daily duration stays within the available cost?
Six further modelling lessons
How to decide which model is sufficient
A useful model does not need to include every possible real-world factor, but it must include enough information to answer the stated question. For an energy-only budget, lamp count, power, hours, days and an assumed rate may suffice. For a procurement decision, purchase price and equipment lifespan also matter. For plant performance, additional evidence about light distribution and growth is necessary. A student should state the purpose before judging the adequacy of the formula.
Interpreting a feasible region
Several restrictions can apply at once. A budget may allow at most five full hours, while a given classroom brief requires at least four hours. Then four and five hours satisfy both if whole-hour scheduling is required. If the minimum requirement were six, there would be no feasible value under the budget. This is the mathematical meaning of conflicting constraints. The correct answer may be that the assumptions must be reconsidered, not that arithmetic should be forced.
Making a table before an algebraic rule
Some learners see a pattern more readily through a table. Write the costs at one, two, three and four daily hours, then identify the constant increase. Use that increment to derive C = 2.592h. Afterwards verify the rule at a value not originally listed, such as h = 5. The table and algebra are two representations of the same linear relationship and should agree.
Recognising nonlinear complications
The lesson uses a linear energy model because power and the cost per unit are assumed constant. If a fixture cycles unpredictably or a tariff has multiple tiers, a single straight-line rule may no longer describe the situation. Students should not invent a sophisticated model not supplied by the examination; instead identify which assumption would need revisiting. This shows mathematical maturity without departing from the stated syllabus.
Describing a graph in plain English
A good graph explanation names the axes, trend and practical meaning. In the sample model, monthly energy-only cost increases steadily with daily operating hours. The graph’s gradient gives cost added per extra daily hour for the stated month. A horizontal intercept, where one exists, marks a value of the input for which modelled cost is zero. A decorative graph without a verbal interpretation has not completed the problem.
A final check before submitting a Paper 2 answer
Ask five questions: Are the variables clearly defined? Did every unit conversion make sense? Does the inequality point in the correct direction? Is the chosen count or duration permitted by the context? Does the conclusion answer the decision requested rather than something easier? Working through these checks can prevent more mistakes than redoing a calculator sequence without examining the model.
Next in the learner’s guide sequence
This volume is the quantitative continuation of Vol 1371 Physics power and controlled measurement. The following English volume practises a different skill: explaining the budget and its limits to a listener. The concluding EMS volume joins the Physics measurement, Mathematics cost model and English communication without pretending that EMS is an official standalone subject. For weak number foundations revisit the PSLE route; for higher-level reasoning use the Mathematics learning maps and G3 EMS guide. The goal is a student who can build a model, solve it and explain when its conclusion is sufficient.